CLOCK - Time
Briefly displaying the time
➮
To display the time, briefly press
button 6.
the
Setting the time
➮
To set the time, press the MENU
button 8.
➮
Keep pressing the fi or % button
7 until "CLOCK SET" appears in
the display.
➮
Press the # button 7.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮
Adjust the minutes using the %fi
buttons 7.
➮
Once you have set the minutes,
press the @ button 7. The hours
start flashing.
➮
Adjust the hours using the %fi
buttons 7.
When you have finished making your
changes,
➮
press the MENU button 8 twice.
Selecting 12/24-hour clock
mode
➮
Press the MENU button 8.
➮
Keep pressing the % or fi button
7 until "12H MODE" or "24H
MODE" appears in the display.
➮
Press the @ or # button 7 to
switch between the modes.
When you have finished making your
changes,
➮
press the MENU button 8.
Displaying the time continuously
when the unit is off and the
ignition is on
"CLOCK ON" setting in the menu allows
you to display the time when the unit is
off and the vehicle ignition is on,
➮
press the MENU button 8.
➮
Keep pressing the fi or % button
7 until "CLOCK OFF" or "CLOCK
ON" appears in the display.
➮
Press the @ or # button 7 to
switch between the ON/OFF
settings.
When you have finished making your
changes,
➮
press the MENU button 8.
Briefly displaying the time when
the unit is switched off
To briefly display the time when the unit
is off,
➮
button 6.
press the
The time is displayed for eight seconds.
CLOCK - TIME
17