Velleman DVM832 Manual Del Usuario página 9

Only nonconductive pollution occurs.
Pollution Occasionally, temporary conductivity caused
degree 2 by condensation is to be expected. (home and
office environments fall under this category)
• This device is only suitable for measurements
in Pollution degree class 2 environments.
9. Specifications
This device is not calibrated when purchased!
Regulations concerning environment of use:
Use this meter only for measurements in CAT I, CAT II and
CAT III environments (see §7)
Use this meter only in a pollution degree 2 environment
(see §8)
Ideal working conditions include:
temperature: 0 °C to 40 °C (32 °F to 104 °F)
relative humidity: max. 80 %
altitude: max. 2000 m (6560 ft)
voltage .........................................................500 V
fuse protection
F500 mA/600 V, 5 x 20 mm (not replaceable)
F10 A/600 V, 5 x 20 mm (not replaceable)
power supply ................ 2 x 1.5 VDC AAA/R03P (incl.)
display ......................................... LCD, 1999 counts
display dimensions ................................ 47 x 15 mm
over-range ....................................................... yes
continuity buzzer ............................................... yes
transistor test .................................................... no
diode test ......................................................... yes
low-battery indication ........................................ yes
ranging mode ............................................. manual
data hold .......................................................... no
backlight ........................................................... no
auto power-off ................................................... no
V. 05 – 05/01/2022
DVM832
9 ©Velleman Group nv