Switching On/Off; Using The Device - i.safe MOBILE IS120.1 Manual Del Usuario

CHARGING
DANGER
An incorrect procedure in explosion hazardous areas poses risk of death or severe injuries!
Only charge the device outside of explosion hazardous areas. Do not charge the device in the
vicinity of flammable substances.
NOTICE
Incorrect charging can cause damage to the device. Please note the following when charging:
Only charge the device using the i.safe PROTECTOR 1.0 Micro USB Cable supplied.
Only charge the device at ambient temperatures between +5 °C to +35 °C (+41 °F to +95 °F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
Your device package contains a power supply unit, various country-specific adapters, an
i.safe PROTECTOR 1.0 Micro USB Cable.
Connect the adapter suitable for your country to the power supply unit.
Connect the i.safe PROTECTOR 1.0 Micro USB Cable to the power supply unit.
Connect the i.safe PROTECTOR 1.0 Micro USB Cable to the USB interface of the device.

SWITCHING ON/OFF

Press and hold the on/off key for about 3 seconds.
Enter the device or SIM PIN when the input dialog for the device or SIM PIN appears after
switching on.
Select the <Switch off> menu item if the power off menu appears when switching off.

USING THE DEVICE

When turning on the device for the first time, follow the instructions on the screen.
Further information on operating the device can be found at
www.isafe-mobile.com/en/support/service under the menu item "FAQ".
12