Finishing The Installation - LUCCI Air AIRFUSION MOTO Manual Del Usuario

AIRFUSION MOTO Installation Instructions
Carefully insert the receiver above the hanger ball in the remainder spacing in the mounting bracket. Take
care not to damage or loosen any of the wiring. (Fig. 8).
NOTE: Ensure the earth wiring is secure and correct, by performing an earthing continuity
test from the fan's accessible metal body back to the earth terminal at the terminal
block on the mounting bracket.
INSTALLATION OF THE CANOPY (Fig. 9)
1. Loosen the 2 screws at the bottom of the mouthing bracket.
2. Slide the canopy up to the mounting bracket and align the key holes on the canopy with the screws on the
mounting bracket. Turn the canopy until it locks into place with the narrow section of the key holes and
secure it by tightening the two screws. Avoid damaging the electrical wiring prepared previously.
3. Slide the canopy cover up to the canopy.
8 | P a g e

FINISHING THE INSTALLATION

Fig. 8
Fig. 9