Sony SU-PF1 Manual De Instrucciones página 9

3
Take up the slack out of the mains lead and Display Interface Cable
already drawn through the hole on the stand.
Pull the ends of the mains lead and Display Interface Cable already drawn through the hole on the stand and
take up the slack out of the lead and the cable.
Fix the Display Unit
Attach the fixing plate to prevent the Display Unit from falling.
1 Insert the fixing plate between the screw on the upper part of the fixture on the stand and the hook on the
Display Unit.
2 Slide the fixing plate until the corner of the L-figure hits against the screw.
Mains lead and Display Interface
Cable
Fixing plate
9
(GB)