Metra 95-HDIF2 Manual De Instrucciones página 3

9. Remove (4) 1/2" nuts securing the radio
and inner fairing to the bikes frame.
Tilt radio bracket toward the back of
bike and remove the bracket and radio
assembly. (Figure E)
10. At this point the inner fairing will be
loose. To remove the inner fairing pull it
away from the mounting location and
push the OE wiring harness through the
oval opening. (Figure F)
Continue to Fairing Preparation
FAIRING DISASSEMBLY
(Figure E)
(CONT.)
(Figure F)
3
REV. 7/12/2021 INST95-HDIF2