Profi Care PC-HTH 3003 Manual De Instrucciones página 27

Campana secadora de cabello
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
NOTE:
• High temperatures can arise in areas with little or no hair
between the hair-dryer hood and the skin. Select the
correct heat /blowing level.
• Warm air can blow into the ears.
• Oil and grease can leave traces on the hair-dryer hood.
Clean these as directed under "Cleaning".
Hair Dryer
If you wish to dry specific sections of your hair only, attach the
styling nozzle. That will concentrate the air flow.
Round brush (Curling brush)
If you wish to style your hair curly, attach the round brush.
Comb your hair and separate it into single strands. Twist one
hair strand around the brush starting from the tips all the way
to the hairline. Keep holding the appliance in that position for
several seconds until the desired degree of drying and styling
has been achieved.
Assembly / Disassembly of Attachments
WARNING: Risk of burns!
If you want to change an attachment directly after use, let
the appliance cool down first!
CAUTION:
The locking mechanism can break if you install or remove
the attachments in any other way than as described.
Note the guides on the basic appliance and in the attach-
ments. The attachments have an additional marking on the
outer edge.
• Put on an attachment until it audibly snaps into place.
Make sure that the marking is in line with the button.
• Press the button on the basic appliance in order to release
the locking. Remove the attachment.
Electrical Connection
1. Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
2. Connect the appliance to a properly installed earthed
socket.
PC-HTH3003_IM
Use
1. After washing your hair dry it with a towel.
2. Select the desired attachment.
3. Unwind the mains cable completely.
4. Shift the switch on the handle to one of the desired heat /
blowing levels:
Level 0: Off
Level 1: Medium temperature
Level 2: High temperature
Level : Cold setting for style fix
Ionizing Function – Reduction of Static in Hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for a
silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
Set the bottom switch to "0" after use and disconnect from
the mains.
Storage
• Leave the appliance to cool down before putting it away!
• Remove the attachment.
NOTE:
Let the hair-dryer hood dry completely after use!
• Stow the appliance and the attachments in the provided
storage bag.
• You also have the option to hang the appliance on the
suspension eye.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the appliance, as over
time this may result in the cable breaking.
• Check the mains cable regularly for damage.
27
06.10.17

Publicidad

Tabla de contenido
loading

Tabla de contenido