All manuals and user guides at all-guides.com
Operation Instructions
BEEPS DURING OVEN SETTINGS
• ONE BEEP: Oven accepts the entry.
• TWO BEEPS: Oven does not accept
the entry, check and try again.
SETTING THE CLOCK
This is a 12-hour clock. When the oven
is first plugged in or when power
resumes after a power interruption, the
display will show ENTER CLOCK TIME,
if you prefer to not have the clock
displayed, touch RESET pad. You can
check the clock time while cooking is in
progress by touching the CLOCK pad.
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock (one
for hour and two for minutes).
3. Touch CLOCK pad again.
SETTING THE OVEN TIMER
1. Touch TIMER pad.
2. Enter the amount of time you want to
count down by touching the number
pads. Digit time is in minutes and
seconds and set left to right. Set one
digit (a 5 for 5 seconds) or up to four
digits (2405 for 24 minutes, 5
seconds).
3. Touch START/STOP pad.
NOTE:
1. Time countdown can be seen in
display for 3 seconds before clock or
cooking time is returned to display.
2. Touch TIMER and then touch RESET to
cancel TIMER during timing process.
SETTING COOKING TIMES
AND POWER LEVELS
One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds. If you are setting a time
greater than one minute, you must
enter numbers for both minutes and
seconds. For example, to set 20
minutes, enter 2,0,0,0.
2. If you want to set a power level other
than 100% powers, touch POWER,
then use the number pads to enter the
power level. You can set the power
level from 1 to 9.
3. Touch START/STOP to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad
% of Power
9
8
7
6
5
4
3
2
1
English
90%
80%
70%
60%
50%
40%
30%
20%
10%
12