Operation Instructions; Setting The Clock - Haier MWG10021TW/B Manual Del Usuario

BEEPS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the entry, check and try again.

SETTING THE CLOCK

1. Touch CLOCK pad.
2. Use the number pads to enter the correct time. You must touch at least three numbers to set the clock
(one for hour and two for minutes).
3. Touch CLOCK pad again.
NOTE: This is a 12 hour clock. When the oven is plugged in or when power resumes after a power interruption,
the display will show ENTER CLOCK TIME, if you prefer to not have the clock displayed, touch RESET
pad. You can check the clock time while cooking is in progress by touching the CLOCK pad.
SETTING THE OVEN TIMER
1. Touch TIMER pad.
2. Enter the amount of time you want to count down by touching the number pads. Digit time is in minutes and
seconds and set left to right. Set one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes,
5 seconds).
3. Touch START/STOP pad.
NOTE: • Time countdown can be seen in display for 3 seconds before clock or cooking time is returned to
display.
• Touch TIMER and then touch RESET to cancel TIMER during timing process.
SETTING COOKING TIMES AND POWER LEVELS
A. One-stage Cooking
1. Use the number pads to set a cooking time. You can set a cooking time from one seconds to 99 minutes
and 99 seconds. If you are setting a time greater than one minute, you must enter numbers for both
minutes and seconds. For example, to set 20 minutes, enter 2,0,0,0.
2. If you want to set a power level other than 100% power, touch POWER, then use the number pads to
enter the power level. You can set the power level from 1 to 9.
3. Touch START/STOP to start cooking.
B. Two-Stage Cooking
Some recipes require different stages of cooking at different temperatures.
1. SET STAGE 1: Follow steps 1 and 2 in "One-Stage Cooking." DO NOT TOUCH START/STOP PAD.
2. SET STAGE 2: Touch COOK pad then enter proper cooking time and (lower) power level. (Most 2-stage
3. Touch START/STOP pad.
NOTE: After stage 1 time has elapsed, two beeps sound, signaling the beginning of stage 2. After total time has
elapsed, 4 beeps sound and END appears in display. Touch RESET pad or open oven door to clear END
before starting another cooking function.
All manuals and user guides at all-guides.com

OPERATION INSTRUCTIONS

USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad
recipes use lower power for second stage.)
% of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
8
English