Power On - Midea MLV45N1B Serie Manual Del Propietario & Instrucciones De Instalación

3. If your washer is not level, carefully tilt your washer just enough to
adjust the leveling feet on the bottom front of your washer. Extend the
feet only as much as is necessary. If the feet are extended too much,
your washer may vibrate.

Power on

Plug the power cord into a well-grounded, 3-prong, 120 Volt 60 Hz
approved electrical outlet, protected by a 15-amp fuse or comparable
circuit breaker. Your washer is grounded through the third prong of the
power cord.
Washer is level – the
Leveling circle
water touches the
leveling circle all
the way around.
loosen
Washer not level - the
water does not touch
the leveling circle all
the way around.
lock
Adjustable legs
25