Taurus OPTIMA EASY Manual Del Usuario página 10

USE:
- Unroll the cable completely before plugging it in.
- Ensure the blade fixing ring is fixed properly to
the jar (by turning clockwise) before putting on
the motor body. (Fig.1).
- Place the jar onto to the motor unit; turn clockwi-
se until the lock clicks into place. (Fig.2). (Only
available in the model Optima Easy).
- Put the ingredients, after having first chopped
them into small piece, into the jar with liquid (do
not exceed the maximum marker).
- Put the lid on the jar; make sure it is properly
fixed in place.
- Put the measuring cup in the lid.
- Connect the appliance to the mains.
- Turn the appliance on, by using the selection
knob.
- Choose desired speed and start blending.
- If you wish to add more ingredients pull out the
measuring cup.
- Add the ingredients and replace the measuring
cup.
- To stop the appliance set the speed back to "0".
- To avoid a fierce start up of the fan, it is advisa-
ble to start off from the lowest speed position
and, once the fan has been switched on,
progressively increase the speed to the desired
position.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed regulator control (I). This
function is very useful, as it makes it possible to
adapt the speed of the appliance to the type of
work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
selector control.
- Unplug the appliance from the mains.
- Turn the mixing jar anticlockwise and remove it
from the motor body.
- Clean the appliance.
"PULSE" FUNCTION
- The appliance works in highest speed to achie-
ve optimal performance.
- Press this button to operate and release the
button when you wish to stop operating.
- We recommend working by turning the speed
selector in cycles of 3 seconds and repeating
the operation until you obtain the desired result.
All manuals and user guides at all-guides.com
CABLE COMPARTMENT
- This appliance has a cable compartment situa-
ted on its underside.
LID WITH SECURITY SYSTEM AND FILTER
(ONLY AVAILABLE IN THE MODEL OPTIMA
EASY)
- The lid has a security system to guarantee the
safety of the user. If the cover is not assembled
correctly the product does not start. Before
starting the appliance, place the lid on the jar
and turn it until the lid and handle marks match.
(Fig.3)
- The lid has a filter for the pulp of juices and
purees.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- The following pieces may be washed in a dis-
hwasher (using a soft cleaning program):
- Jug.
- Lid.
- Measuring cup
- Then dry all parts before its assembly and
storage.
SELF-CLEANING FUNCTION:
- Put water and a small amount of washing up
liquid in the jar.
- Select the function "pulse".
REMOVABLE BLADES FOR EFFECTIVE
CLEANING
- Loosen the blade fixing ring by turning it in cou-
nter clockwise. (Fig. 4)