General Safety - GMC GCHD12 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115
F Compressor Pro
Speciication
Drill:
Model number
Technology
No load speed
Impacts per minute
GB
Torque settings
Chuck capacity
Weight
Drilling Capacities:
Mild steel
Wood
Masonry
Battery:
Cell type
Voltage
Capacity
Charger:
Input power
Output power
Charging time:
Cable length
Ingress protection
Protection class
Sound and vibration information:
Sound pressure L
PA
Sound power L
WA
Uncertainty K
Weighted vibration a
(no load)
h
Weighted vibration a
(drilling metal)
h
Weighted vibration a
(drilling masonry)
h
Uncertainty K
As part of our ongoing product development, speciications of GMC products
may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
All manuals and user guides at all-guides.com
GCHD12
12V, Li-Ion
-1
Low gear 0 – 300min
-1
High gear 0 – 1300min
Low gear 0 – 13,000min
-1
20+2
10mm (3/8")
1.5kg
6mm
20mm
8mm
Li-Ion
12V, DC
1.5Ah
230V~ 50Hz, 25W
12V DC, 1500mA
1hr
2m
IPX0
80.64dB(A)
91.64dB(A)
3dB
2
0.791m/s
2.130m/s
2
7.495m/s
2
2
1.5m/s
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
protection is correctly itted and provides the correct level of sound attenuation
even with ear protection, stop using the tool immediately and check the ear
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
comfortable temperature, as vibration will have a greater effect. Use the igures
use anti-vibration gloves. Do not operate the tool with hands below a normal
provided in the speciication relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the speciication are determined according to
EN60745 or similar international standards. The igures represent normal
use for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.

General Safety

WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety. Children must be supervised to ensure that they do not play
with the appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido