HEIDENHAIN EIB 5181 Modo De Empleo página 49

EIB 5282 and EIB 5281 (without X4)
X4
X1
X3 X2
EIB 5181
S1 S2 S3
X108 X136 X75
HEIDENHAIN | EIB 5000 | Operating Instructions | 11/2020
5.3 Connecting the temperature sensors
The EIB 52xx variants are designed to operate in a
predefined manner. The connected temperature sensors
and the defined time constant are indicated on the ID
label and in the product brochure. The switching output
for errors and warnings is preset based on the variant. All
EIB 528x variants are preconfigured for using the PT1000
as temperature output format.
With the EIB 5181 variant, you can use the DIP switches
to define its mode of operation.
"DIP switch", Page 52
Example (information on ID label and assignment to X1)
1KTY84 1PTCD:
Temperature sensor 1 = KTY84-130
Temperature sensor 2 = PTC triplet
Temperature sensor 3 = Not connected
KTY84KTY84PTCD:
Temperature sensor 1 = KTY84-130
Temperature sensor 2 = KTY84-130
Temperature sensor 3 = PTC triplet
Comply with the pin layout
Further information: "EIB 5181", Page 292
Further information: "EIB 521x", Page 293
Further information: "EIB 528x", Page 295
Further information:
49