Speaker Mode; Storing The Headphones - Silvercrest SKBA 2 A1 Instrucciones De Uso

All manuals and user guides at all-guides.com
♦ Connect the audio cable u to the audio output (e .g . headphone jack) on
the playback device .
♦ Switch on the playback device and set the volume to minimum .
Put on the headphones as described in the section "Wearing the
♦
headphones" .
♦ Set the desired volume on the playback device .

Speaker mode

You can also use the headphones as mobile speakers .
In Bluetooth
®
♦ Connect the headphones with a playback device as described in the
section "Pairing the headphones with a Bluetooth
♦ Move the slider switch
indicates that speaker mode is activated .
♦ Move the slider switch
mode .
In AUX IN mode
If you are using a playback device in Bluetooth
♦
Bluetooth
®
connect the headphones with the audio cable u .
♦ Connect the headphones to a playback device as described in the section
"AUX IN mode" .
♦ Move the slider switch
♦ Press the
charging LED 0 flashes blue and the LED 2 lights up blue . Speaker
mode is now activated .
♦ Move the slider switch
mode .

Storing the headphones

Your headphones are fitted with swivelling earpieces, allowing them to be
folded and stored without taking up much space .
Proceed as follows to fold the headphones:
♦ Swivel both earpieces e + r so that they are inside the
headband 1 . You can now store the headphones in a
space-saving way .
SKBA 2 A1
mode
function on the playback device is deactivated before you
button 5 for about 2 seconds until the operating/
3 to the position . The blue LED 2
3 to the position to deactivate speaker
3 to the position .
3 to the position to deactivate speaker
device" .
®
® mode, ensure that the
GB │ IE │ 27 ■