Matrix R30 Manual De Instrucciones página 98

7
U30 / U50 ASSEMBLY COMPLETE!
98
SEAT ADJUSTMENT
To determine proper seat position, sit on the seat and position the ball
of your foot on the center of the pedal. Your knee should bend slightly
at the furthest pedal position. You should be able to pedal without
locking your knees or shifting your weight from side to side.
NOTE: It is recommended that you do not sit on the seat while adjusting its position.
U30
To adjust, loosen the adjustment
knob by turning it two half turns
counterclockwise. Pull out the
knob to unlock the post, and
adjust the post up or down to
the desired setting. Release the
knob to lock in place. Turn the
knob clockwise until tightened.
Please check to be sure seat post is
locked in place before each use.
U50
To adjust, lift up on the adjustment
lever and hold while sliding the post
up or down to the desired setting.
Release the lever to lock in place.
Please check to be sure seat post is
locked in place before each use.
HANDLEBAR POSITION
To adjust, rotate the adjustment
lever down and slide the handlebar
set to a position that puts the
handlebars within comfortable reach.
Lock the mechanism by lifting up
on the adjustment lever until tight.