Intended Use - Bosch LR2 Instrucciones De Funcionamiento

Maintain tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition
that may affect the operation. If damaged, tool repaired
before use. Many accidents are caused by poorly
maintained tools.
Use the tool, accessories, etc., in accordance with these
instructions and in the manner intended for the particular
type of tool, taking into account the working conditions and
the work to be performed. Use of the tool for operations
different from those intended could result in a
hazardous situation.
Have your tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the tool is maintained.
Develop a periodic maintenance schedule for tool. When
cleaning a tool be careful not to disassemble any portion of
the tool since internal wires may be misplaced or pinched
or may be improperly mounted. Certain cleaning agents such
as gasoline, carbon tetrachloride, ammonia, etc. may damage
plastic parts.
The tool is intended for detecting pulsating line lasers.
Alkaline batteries are recommended for the tool.
Pull the latch 11 of battery lid outward and open the battery
lid 13.
When inserting batteries, pay attention to the correct polarity.
When the battery indication e appears for the first time on the
display 4, the tool can still be operated for approx. 2 h.
• Remove the batteries from the tool when not using
it for extended periods. When storing for extended periods,
the batteries can corrode and discharge themselves.
Service
SAVE THESE INSTRUCTIONS.

Intended Use

Preparation
Inserting/Replacing the Battery
-7-