Extension Cords - Kärcher NT 611 Eco K Instrucciones De Servicio

Ocultar thumbs Ver también para NT 611 Eco K:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions
WARNING:
Improper connection of the
equipment-grounding conductor
can result in a risk of electric
shock.
Check with a qualified electrican or
service person if you are in doubt
as to whether the outlet is properly
grounded.
Do not modify the plug provided
whith the appliance.
If it will not fit the outlet, have a
proper outlet installed by a
qualified electrican.
This appliance is for use on a
nominal 120-volt circuit, and has a
grounded plug that looks like the
plug illustrated in Fig.A.
A temporary adapter that looks like
the adapter illustrated in Fig.B,
may be used to connect this plug
to a two-pole receptacle as shown
in Fig.B, if a properly grounded
outlet is not available.
The temporary adapter should be
used only until a properly
grounded outlet (Fig.A) is installed
by a qualified electrican.
The green colored rigid ear, lug, or
the like extending from the adapter
must be connected to a permanent
ground such as a properly
grounded outlet box cover.
NT 611 Eco K
Whenever the adapter is used, it
must be held in place by a metal
srew.
WARNING:
In Canada, the use of a temporary
adapter is not permitted by the
Canadian Electrical Code.
IN ALL
CASES,
MAKE SURE
THE
RECEPT-
ACLE IN
QUESTION IS
PROPERLY
GROUNDED.
NEVER
REMOVE
GROUNDING
PRONG
FROM
POWER
PLUG.
EXTENSION
CORDS
Use only three-wire extensions
cords that have three-pong
grounding-type plugs and
three-pole receptacle that accepts
the appliance's plug. Replace
damaged or worn cord
immediately.
English
DO NOT
ATTEMPT
TO REPAIR
POWER
CORD.
Figure A
1. Groundet outlet box
2. Current carrying prongs
Grounding prong is longest of
the 3 prongs
6

Publicidad

Tabla de contenido
loading

Tabla de contenido