Water Container; To Remove The Container - Hoover Vision HD Serie Manual De Instrucciones

40005377.qxd 26/09/2007

Water Container

The water removed from the laundry during the
drying cycle is collected in a container at the
bottom of the dryer.
When the container is full the
the control panel will light, and the container
MUST be emptied. However, we recommend that
the container is emptied after each drying cycle.
NOTE: Very little water will collect during the
first few cycles of a new machine as an internal
reservoir is filled first.

To remove the container

1. Gently pull out the tray until it is completely
removed. Support the tray with both hands.
When it is full the water container will
weigh about 4kg.
2. Tilt the water container to empty the water
out through the rear hole. When empty
slide the water container back into position.
PUSH FIRMLY INTO PLACE.
NOTE: If you have the option of drainage near
the dryer it is possible to use the discharge kit to
provide a permanent drain for the water
collected by the dryer. This will remove the need
to empty the water tray. All the information for
assembly of the kit is contained in the kit
envelope.
All manuals and user guides at all-guides.com
14:12 Page 13
indicator on
13