Total Rainfall; Rainfall Alert; Temperature; Reset - Oregon Scientific RGR126NX Manual De Usuario

To display the record for a particular day:
HIST to toggle
between daily rainfall
and rainfall history over
the past nine days. The
day of the record will be
displayed with a minus
(-) sign at the top left
hand corner. TODAY
means the record is for
the current day.
NOTE Other sensors using the 433 MHz transmission
frequency may influence the rainfall reading. Please avoid
placing those sensors too close to the unit.

TOTAL RAINFALL

The total rainfall is displayed on the second line of
the display.
To display the commencing date of the total
rainfall record:
SINCE. The date when the measurement
started will appear on the bottom line of the display.
To clear the existing commencing date and reset it
to start again:
SINCE. The total rainfall will be
reset to zero and then collect the rainfall data
starting from today.
RGR126NX_UM_EN_R1.indd 9

RAINFALL ALERT

To set the rainfall alert value:
1. Press and hold RAIN ALERT to enter setting mode.
2. Press UP or DOWN to toggle values.
3. Press RAIN ALERT
alert function is enabled.
To deactivate rainfall alert:
equal to or more than the rainfall alert value;
twice and wait for 8 seconds, or
rainfall alert value.

TEMPERATURE

To toggle temperature unit:
/ .

RESET

Press RESET to return to the default settings.
NOTE The main unit returns to default settings in each
battery replacement.
9
indicates rainfall
will
RAIN ALERT
increase the