Bestway 58498E Manual Del Usuario página 10

pump is running can damage the Control Valve, which may cause
personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and rotate to desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6 different filter functions: Filter, Rinse,
Circulate, Backwash, Closed and Drain.
Filter:
This function is used to filter pool water
and should be positioned here 99% of the time.
Water is pumped through the sand filter, where it
is cleaned and returned to the pool.
A
Backwash:
the sand bed; water is pumped down through the
Collector Hub, upwards through the sand bed,
and deposited out of Port D.
A
Drain:
This function drains water from the pool;
another filter bypass setting, water is pumped and
deposited out of Port D, instead of returning it to
the pool.
A
C
B
This function is used to clean
C
D
B
C
D
B
Closed:
between the sand filter and the pool.
A
Rinse:
and sand bed leveling after Backwash; water is
pumped downwards through the sand bed, up
through the Collector Hub and deposited out of
the valve Port D.
A
Circulate:
by passing the sand filter; use this function if the
filter is broken to collect debris in the Debris
Screens.
A
10
This function stops water flowing
C
B
This function for initial startup, cleaning,
C
D
B
This function circulates pool water
C
B