Setting Sleep Timer; Setting The Alarm - Sunstech STBTK150 Manual Del Usuario

5. Press MEM/CLOCK button again on the remote control to confirm the setting
and it will automatically go to minute setting.
6. Press the TUN+/CLOCK + or TUN-/CLOCK- button on the remote control to
adjust up or down the minute.
7. Press MEM/CLOCK button again on the remote control to confirm the setting.

(7) Setting SLEEP timer:

1. Press the POWER button to switch on the unit.
2. Press the SLEEP button repeatedly to select the preset set timer. Time presets
available are 5, 10, 15, 30, 60, 90 minute.
3. After the set sleep time has expired, the tower bar will automatically power off.

(8) Setting the alarm:

1. Press the POWER button to turn the tower speaker on.
2. Press the POWER button and select the FM mode on the remote control. Press
the TUN+/CLOCK + or TUN-/CLOCK- button to select the desired radio frequency.
3. Press the POWER button on the remote control to switch off the power.
4. Press the ALARM button on the remote control to set the alarm.
5. The time on the LCD display will begin blinking.
6. Press the TUN+/CLOCK + or TUN-/CLOCK- button on the remote control to
adjust up or down the hour.
7. Press MEM/CLOCK button again on the remote control to confirm the setting
and it will automatically go to minute setting.
8. Press the TUN+/CLOCK + or TUN-/CLOCK- button on the remote control to
adjust up or down the minute.
9. Press the ALARM button again on the remote control to confirm the setting.
10. After the set sleep time has expired, the ALARM will ring the preset radio
station.
11. Press the ALARM button on the remote control to switch on or off the alarm
setting.
12. Press and hold ALARM button to on alarm icon or off alarm icon.
12