Automatic Power Off Function; Connecting The Microphone - Sunstech STBTK150 Manual Del Usuario

AUTOMATIC POWER OFF FUNCTION

The tower speaker will turn to standby mode after 60 minutes if an external device
connecting to LINE in, RCA or BT is disconnected or the volume is too close to
mute.
INSTALLING THE BASE TO THE TOWER

CONNECTING THE MICROPHONE

1. Take out the base and a piece of screw Ø10×28mm
(supplied).
2. Matches those pillars of the tower (at the bottom) with
the appropriate holes from the base.
3. Screws up with screw Ø10×28mm.
8
Insert the microphone
plug into MIC JACK 1
and MIC JACK 2.