Viega Multiplex Trio 6170.10 Instrucciones De Montaje página 30

Instruction for use Multiplex Trio
GB
Intended use
Multiplex Trio is a combined inlet, drain and overflow fitting with optional 5 cm water
level increase for bathtubs with a 52-mm drain hole.
It is exclusively designed for household wastewater. Introducing other liquids such
as cleaning agents that could damage sanitary equipment, drain components and
pipe materials, especially those with a pH value of less than 4, is not permitted.
Installation must only be performed by specialist companies in compliance with
local building code.
Drainage capacity
Overflow capacity
Caution: Safeguard drinking water from contamination.
To prevent contamination of drinking water caused by bath water flowing back
into the drinking water system, a pipe interruptor must be installed between the
concealed shut-off fitting and the bathtub inlet. Local standards and regulations
must be observed.
This instruction manual should be given to the building owner after assembly.
A
Model Art.-No. Product description
6170.10 723 347
6170.11 733 605
6170.12 733 612
0.92 l/s
0.55 l/s or 0.63 l/s
Multiplex inlet and overflow,
with 5 cm water level increase,
with rotatable collar, valve cone, odour trap,
drainage elbow 45°,
Bowden wire 560 mm long,
chrome-plated version
Multiplex inlet and overflow,
with 5 cm water level increase,
with rotatable collar, valve cone, odour trap,
drainage elbow 45°,
Bowden wire 725 mm long,
chrome-plated version
Multiplex inlet and overflow,
with 5 cm water level increase,
with rotatable collar, valve cone, odour trap,
drainage elbow 45°,
Bowden wire 1070 mm long,
chrome-plated version
30