Descargar Imprimir esta página

Viega Multiplex Trio 6170.10 Instrucciones De Montaje página 31

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Instruction for use Multiplex Trio
GB
B
Components
 overflow unit
e flange cover
i rotatable rosette j valve cone
m valve top
q sliding ring
u sliding ring
21
u sleeve
25
C
Dimensions
Model
6170.10
6170.11
6170.12
D
Pipe interrupter
Safeguard drinking water from contamination
To prevent contamination of drinking water caused by bath water flowing back into
the drinking water system, a pipe interrupter must be installed between the concealed
shut-off fitting and the bathtub inlet. Local standards and regulations must be
observed.
Note: The pipe interrupter is not included in the scope of delivery and must be ordered
separately!
 Backflow situation
In the case of a vacuum,
there is the possibility
that water from the
bathtub may flow back
into the drinking water
system.
 profile seal
f supply flange
n profile seal
r wedge seal
u union nut
22
u connection
26
adapter
L
100 - 260
180 - 400
130 - 370
180 - 430
100 - 680
180 - 480
 Installation diagram
 double seal
g site protection
k site protection
o drain elbow
s odour trap
u overflow pipe
23
H
31
d seal
h fixing screw
l fixing screw
p union nut
t wedge seal
u Bowden cable
24
 Connecting set with
concealed pipe inter-
rupter DN 20 in acc. with
DIN EN 1717 securing
equipment DB
model 6161.86

Publicidad

loading

Este manual también es adecuado para:

Multiplex trio 6170.11Multiplex trio 6170.12