Screen And Control Elements; Screen Data And Function - Decathlon ORIGINAL 920E Manual Del Usuario

SCREEN AND CONTROL ELEMENTS

Screen data and function

Assistance mode (0-1-2-3):
1 «0» no assistance.
Each mode corresponds to the maximum assistance speeds set out below:
Mode
Maximum assistance
speeds
Average autonomous range
ON/OFF button:
Switch the electrically-assisted bicycle on and off by holding the button down for a few
2
seconds.
Scroll through the route information (TRIP, ODO, TRIPtoGO) with a short press.
«+» button:
3 Step up to the higher power assistance mode by briefly pressing the button
Switch to «walk assist» mode by holding the button down for a few seconds.
«-» button:
4 Switch to a lower power assistance mode by briefly pressing the button.
Resetting the TRIP distance counter by a long press (5-10s)
Lighting button
5 Turn the screen backlighting on and off with a short press
Go to the settings by holding the button down for a few seconds
6 Speed indicator
»Walk assist» mode:
6
7 For walking beside the bicycle in walk assist mode, up to 6 km/h, without pedalling.
KM
Please note that this mode should not be used when riding the bicycle
11
2
5
3
4
1 13 8
0
No assistance
/
6
KM
9
1
17 Km/h Max 22 Km/h Max
70 km (estimated with mode 2 active)
7
7
6
12
10
2 3
25 Km/h Max