Connection instructions
•
When connecting, ensure the power supply to each unit is switched off.
•
The other devices and connection cables required are sold separately.
1
Connect the devices to the connection terminals at the rear panel.
Connection example
VGA IN
BNC IN
BNC OUT
Y/C OUT
AUDIO OUT AUDIO IN
2
Connect the power cord (DC 12V).
Connect the included AC adapter plug to the power input terminal (DC IN), and then connect the
AC cord between the AC adapter and AC outlet.
• Once the power cord is connected, the power supply will reach the main unit.
5
English
(Refer to x for steps.)
DC IN
(Included VGAconnecting cable)
Y/C IN
AUDIO LINE OUT
AC adapter
(included)
AC cord (Included)
: Input signal
: Output signal
VGA OUT
BNC OUT
BNC IN
Y/C (S-VIDEO) OUT
Y/C (S-VIDEO) IN
Amplifier etc.
Computer
CCD Camera etc.
Monitor TV etc.
Hard-disk recorder etc.
AUDIO LINE IN