Monitoring Display Adjustment - Sanyo VMC-L1015 Manual De Instrucciones

Monitoring display adjustment

Adjustment method for
Operation
MENU AUTO
MENU
q w
Adjustment item
Item
Color Adjust the color.
Tint Adjust the tint (only available for NTSC signal).
Brightness Adjust the brightness.
Contrast Adjust the contrast.
Sharpness Adjust the sharpness.
Volume Adjust the volume.
H-Position Adjust the horizontal position of the display.
Language Select the language of the display.
Color Temp. Select the color temperature.
Scan Select the image scan type.
Select to use Picture in Picture, showing a sub window
PIP
display in the upper left corner.
Changing the sub window display and display position.
PIP SIZE/POS.
(Page 9)
Display Mode The flickering of the screen is reduced.
Pressing the +, – buttons together will return the
Recall
settings to the default setting.
* May differ depending on location of purchase.
•
The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings
will return to default.
•
The default language display is English. If the language setting is changed, the menu display will be in the
language chosen.
7
English
: Composite/
q
Press the adjustment control (MENU).
e At the top of the screen, an adjustment panel as shown in
w
Choose the adjustment item.
MODE POWER
e
Change the setting value.
r
If necessary, repeat
e
steps w and e.
Description
: S-Video signal selection
the diagram to the right will be displayed.
Down Up
•
Pressing the adjustment control (MENU) again, or waiting
for a number of seconds will cause the adjustment panel to
disappear.
Adjustment item
Composite In
Color
Tint
Brightness
Contrast
Sharpness
Volume
H-Position
Language
Color Temp.
Scan
PIP
PIP SIZE/POS.
Display Mode
Recall
Parameters
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
English, 中文, 日本語,
Français, Español,
Deutsch, Italiano
9300°K, 6500°K,
Standard
Over, Under, Full, 1:1
VGA, DVI, Off
Pip Size, Pip Position,
DEF. Hot Key
Normal, Interlace
–
Setting value
NTSC
25
26
26
25
4
10
25
English
9300K
Full
Off
Pip Size
Normal
Default setting
25
26
26
25
4
10
25
English
Standard
Full
Off
–
Normal
–