Computer Display Adjustment - Sanyo VMC-L1015 Manual De Instrucciones

Computer display adjustment

: Adjustment method for VGA signal selection
Operation
MENU AUTO MODE POWER
MENU
q w e
Adjustment item
Item
Brightness Adjust the brightness.
Contrast Adjust the contrast.
H-Position* Adjust the horizontal position of the display.
V-Position* Adjust the vertical position of the display.
Adjust the clock (when vertical lines can be seen etc.).
Clock* •
Make fine adjustments until the vertical lines disappear.
Adjusting the clock will also change the width of the display.
Phase* Adjust the phase (when the screen is flickering, etc.).
Color Temp. Select the color temperature.
User Color R Adjust the Red (when Color temp. is set to User color).
User Color G Adjust the Green (when Color temp. is set to User color).
User Color B Adjust the Blue (when Color temp. is set to User color).
OSD H-Pos. Adjust the horizontal position of the adjustment panel.
OSD V-Pos. Adjust the vertical position of the adjustment panel.
Volume Adjust the volume.
Select to use Picture in Picture, showing a sub window
PIP
display in the upper left corner.
Changing the sub window display and display position.
PIP SIZE/POS.
(Page 9)
Language Select the language of the adjustment panel.
Pressing the +, – buttons together will return the
Recall
settings to the default value.
* Use this when pressing the automatic display adjustment control (AUTO) (page 6) does not achieve the desired result.
Also, by pressing the automatic display adjustment control (AUTO), these values will be changed.
•
The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings
will return to default.
•
The default language display is English. If the language setting is changed, the menu display will be in the
language chosen.
q
Press the adjustment control (MENU).
e At the top of the screen, an adjustment
panel as shown in the diagram to the right
will be displayed.
w
Choose the adjustment item.
Down Up
e
Change the setting value.
r
If necessary, repeat steps w and e.
•
Pressing the adjustment control (MENU) again, or waiting for a number of
seconds will cause the adjustment panel to disappear.
Description
Adjustment item
VGA IN
Brightness
Contrast
H-Position
V-Position
Clock
Phase
Color Temp.
Use Color R
Use Color G
Use Color B
OSD H-Pos.
OSD V-Pos.
Volume
PIP
PIP SIZE/POS.
Language
Recall
Parameters
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
9300°K, 6500°K,
User color
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
Composite, S-Video,
Component, Off
Pip Size, Pip Position,
DEF. Hot Key
English, 中文, 日本語,
Français, Español,
Deutsch, Italiano
–
Setting value
1024x768@60Hz
26
25
25
32
25
8
User color
51
51
51
25
25
10
Off
DEF. Hot Key
English
Default setting
26
25
25
32
25
8
User color
51
51
51
25
25
10
Off
–
English
–
8
English