Avoiding Material Damage; Operating Elements - Bosch MFQ26 Serie Manual De Usuario

en Avoiding material damage
▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never open the swivel arm during processing.
▶ Never leave the appliance switched on if the power supply is in-
terrupted. The appliance will automatically start up again follow-
ing the interruption in the power supply.
▶ Do not place the hand mixer on the appliance stand or take off
the stand until the drive has stopped and the mains plug has
been pulled out.
▶ Only attach and remove accessories once the drive has stopped
and the appliance has been unplugged.
▶ Do not reach into the bowl or housing when lowering the swivel
arm.
▶ Process hot food carefully.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.

Avoiding material damage

▶ Do not operate the appliance at no-load.
Overview
→ Fig.
1
Openings for the locking mechan-
1
ism
Aperture for inserting the tools
2
Ejector button
3
Switch
4
Mixing bowl
5
Drive gear wheel
6
Locking mechanism for the hand
7
mixer
1
Depending on the model
2
separate operating instructions
14
Lever for the locking mechanism
8
Bowl drive
9
Release button for the swivel arm
10
Appliance stand with swivel arm
11
Turbo stirring whisks
12
Worm drive gear
13
Kneading hooks
14
Universal cutter
15
1
Depending on the model
2
separate operating instructions
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.

Operating elements

Ejector button
For removing the tools.
1 2