brennenstuhl BR 1201 Manual De Instrucciones página 20

052609 Rauchmelder BR 1201-0
Operating Instructions
NOTE: An alarm can simply be stopped by
removing the battery from the battery clip.
The smoke alarm is powered by a battery and
needs no other electical power supply.
Changing / inserting batteries
Action
Removing housing To take out a battery, the
Removing the
old battery
Connect the
new battery
Insert battery
20
All manuals and user guides at all-guides.com
Description
housing must be turned
counterclockwise. The housing
can then be removed and the
battery is freely accessible.
Remove the battery from the
battery compartment.
Remove the battery clip from
the battery terminals.
IMPORTANT: The correct poles
of the battery must be
connected to the smoke
detector's battery clip.
Insert the connected battery in
the battery compartment.
25.10.10 16:24 Uhr
BR 1201