Excalibur EHVR12 Manual Del Usuario página 15

TROUBLE SHOOTING
THE VACUUM SEALER IS NOT VACUUMING CANISTERS PROPERLY
• The accessory hose may not be properly attached. Ensure the hose is completely inserted
into the lid of the canister and the accessory port and try again.
• Make sure the canister lid is turned to the "Vacuum" setting.
• Leave adequate head space at the top of the canister.
• Make sure there isn't any damage to the canister and lid. Sometimes hairline cracks can
develop in canisters. When this happens the canister is no longer air tight and should be
discarded.
• Twist knob on lid of canister to make sure it is attached securely.
In seldom cases some of the programs may cause an error and lead to the machine not work well.
• Unplug from electric outlet and then re-connect it.
www.ExcaliburDIY.com
Professional Vacuum Sealer
13