Vapormed Volcano Medic Modo De Empleo página 29

10. el GeNeR AdoR de AIRe CAlIeNTe
Immunity test IEC 60601
test level
Voltage dips, <5% Uτ (>95%
short dip in Uτ) for
½ cycle
interruptions
and voltage
variations on 40% Uτ (60%
power supply dip in Uτ) for 5
input lines cycles
IeC 61000-4-11
70% Uτ (30%
dip in Uτ) for
25 cycles
<5% Uτ
(>95% dip in
Uτ) for 5 s
power 3 A/m
frequency
(50/60 Hz)
magnetic field
IeC 61000-4-8
Note: Uτ is the a.c. mains voltage prior to application of the test level.
Compliance Electromagnetic envi-
level ronment – guidance
<5% Uτ (>95% Mains power quality
dip in Uτ) for should be that of a
½ cycle typical residential,
commercial or hospital
40% Uτ (60% environment. If the
user of the VOLCANO
dip in Uτ) for 5
cycles MEDIC Vaporization
System requires
70% Uτ (30% continued operation
dip in Uτ) for during power mains
interruptions, it is
25 cycles
recommended that the
VOLCANO MEDIC
<5% Uτ
(>95% dip in Vaporization System
Uτ) for 5 s be powered from an
uninterruptible power
supply.
3 A/m power frequency
magnetic fields should
be at levels characteri-
stic of a typical location
in a typical residential,
commercial or hospital
environment.
56
10. el GeNeR AdoR de AIRe CAlIeNTe
Guidance and manufacturer's declaration – electromagnetic immunity
The VOLCANO MEDIC Vaporization System is intended for use in the elec-
tromagnetic environment specified below. The customer or the user of the
VOLCANO MEDIC Vaporization System should assure that it is used in
such an environment.
Immunity test IEC 60601
test level
Conducted RF 3 V
rms
IeC 61000-4-6 150 kHz to 80
MHz
Radiated RF 3 V/m
IeC 61000-4-3 80 MHz to 2,5
GHz
Compliance Electromagnetic envi-
level ronment – guidance
portable and mobile
RF communications
equipment should be
used no closer to any
part of the VOLCANO
MEDIC Vaporization
System, including
cables, than the
recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
separation distance:
d = 1,2 √P
3 V
rms
d = 1,2 √P
3 V/m
für 80 MHz to 800 MHz
d = 2,3 √P
for 800 MHz to 2,5 GHz
57