Listening To An External Audio Source - Lenco BT-4650 Guia Del Usuario

Figure A :
Different mobile devices takes different operation time, in case at the time the Bluetooth® symbol
changed to "disconnected" status but the 1st 10 seconds were over, try steps (A)-(1) to (3) above for
the auto-connection or try manual connection from your mobile device.
(B) Manual pairing/connection:
In the case you would like to pair/connect other mobile device;
(1) Switch off the Bluetooth® function of the currently paired/connected mobile device.
(2) Main unit enters the Bluetooth® mode, after the 1st 10 seconds, the unit will search for the
nearby Bluetooth® device and the Blue status LED indicator will blink fast.
(3) Turn on the Bluetooth function of the desired mobile device and pair/connect with the main unit.
(C) Out of range situation:
(1) Whilst Bluetooth® music playback, the mobile device is moved to other place which is out of
the Bluetooth® communication range, the communication link disconnected then moves back
the mobile device within range.
(2) The main unit Bluetooth® mode Blue LED indicator will blink which also searches for the nearby
Bluetooth® device.
(3) In this case, you can reestablish the Bluetooth® communication link by implementing approach
(A) or (B) above.
Energy Saving Note
In Bluetooth® mode, if the Bluetooth® communication link disconnected for around 60 minutes, the
unit will go into standby mode automatically.
1. Connect an audio cable with 3.5mm stereo plug from an auxiliary audio device to the AUX IN jack
of the unit.
2. Press the POWER button to turn on the unit.
3. To select auxiliary audio input, press the POWER button until the status LED indicator lights
green steadily.
4. Turn on the external auxiliary audio device.
5. The volume can now be controlled through the unit.
Operate all other functions on the external device as usual.
Notes: (a) Press and hold the POWER button to turn off the unit when you finish listening.
Don't forget to switch off the power of the external audio device as well.
(b) If there is without any music (signal) presented at the AUX-IN input jack for around 10
minutes, the unit will turn into standby mode automatically.
All manuals and user guides at all-guides.com
Bluetooth CONNECTED
MOBILE DEVICE
OR DURING DISCONNECTION
Apple device
(iPhone , iPad)
Samsung S3
Samsung Galaxy

Listening to an external audio source

Bluetooth
DISCONNECTED
(Blue)
6
(Light Gray)