Panasonic AV-HS04M7D Instrucciones De Uso página 17

Operation (3D mode)
Adjusting the positions of the images
 Press the [INPUT] button to light its indicator, and
display the INPUT menu.
 Refer to "2-1-5. LCD menu area" in the Operating
Instructions of the AV-HS450.
 Turn [F1] to display the INPUT XX sub menu.
For X (X: IN1 to IN16), select the input whose image
position is to be adjusted.
 Turn [F2] to display the 3DAdj2 third menu.
<Menu display>
INPUT XX | 3DAdj2 | Cnvrgnc | TB
(SDI) | 6/19 |
 Turn [F3] to adjust the position in the horizontal
direction for the Cnvrgnc item.
When [F3] is turned clockwise:
The value changes in the "+" direction.
The image of the odd-numbered input connector
(Lch) moves to the right and, conversely, the image
of the even-numbered input connector (Rch) moves
to the left.
When [F3] is turned counterclockwise:
The value changes in the "–" direction.
The image of the odd-numbered input connector
(Lch) moves to the left and, conversely, the image
of the even-numbered input connector (Rch) moves
to the right.
 The value which is displayed indicates a percentage
of the picture width.
 When an odd-numbered input connector is selected
and its signals are adjusted, the adjustment will also
be performed for the even-numbered input connector
in the same pair of connectors.
Conversely, when an even-numbered input connector
is selected and its signals are adjusted, the
adjustment will also be performed for the
odd-numbered input connector in the same pair of
connectors.
Examples:
 When INPUT1 is selected and "4.0" is set for
the Cnvrgnc item, the Cnvrgnc item of INPUT2
will also be set to "4.0".
 When INPUT2 is selected and "–5.0" is set for
the Cnvrgnc item, the Cnvrgnc item of INPUT1
will also be set to "–5.0".
|
0.0| 0|
−12.0 −30
| |
12.0 30
 Turn [F4] to adjust the vertical position for the TB item.
When [F4] is turned clockwise:
The value changes in the "+" direction, and the
image moves down.
When [F4] is turned counterclockwise:
The value changes in the "–" direction, and the
image moves up.
 The value displayed indicates the number of screen
lines.
26 (E)