Panasonic AV-HS04M7D Instrucciones De Uso página 23

Operation (3D mode)
Setting the output signals
 Press the [OUTPUT] button to light its indicator and
display the OUTPUT menu.
 Refer to "2-1-5. LCD menu area" in the Operating
Instructions of the AV-HS450.
 Turn [F1] to display the OUTPUTYY sub menu.
(Y: OUT1 to OUT6, A1, A2, B1 or B2)
The output used to assign the output signal is selected
for Y.
 Turn [F2] to display the Asign sub menu.
<Menu display>
OUTPUTYY | Asign | Source | Mode↓
| 1/2 |
 Turn [F3] to set the type of output signal using the
Source item.
 In the 3D mode, Lch and Rch are present in each of
the output signals listed below.
PGM:
An image provided with the wipe, mix, key,
downstream key or other effect is output at the
switcher's main line output.
PVW:
This is the preview output that enables the next
operation to be checked before it is executed.
AUX1 to 4:
The signals selected by the AUX bus in lines 1 to 4
are output.
CLN:
The clean signal (the image resulting when the key,
downstream key or other effect has been removed
from the PGM signal) is output.
MV:
This is the multi view display output.
Multiple input signals and output signals are reduced
in size and output to one screen.
KeyOut:
The key signal is output.
| 3DFrmt↓
PGM| —|  L
PVW Normal R
CLN DC SbyS
AUX1~4 LbyL
MV LRMIXa
KeyOut LRMIXb
LRDiff
LRChk
 When output of the SDI output board (option:
AV-HS04M7/AV-HS04M7D) has been selected, turn
[F4] to set the output mode using the Mode item, and
press the [F4] switch to enter the setting.
An asterisk () appears on the left of the currently
selected output mode.
Normal:
The same signals as the system format signals are
output.
DC (down-converter):
When the system format is 1080/59.94i or
720/59.94p, the signals are output in the 480/59.94i
format.
When the system format is 1080/50i or 720/50p, the
signals are output in the 576/50i format.
Note
DC cannot be selected if "LbyL" has been selected
as the 3DFrmt item setting.
 The term "system format" used here refers to
the video format which has been selected on the
SYSTEM menu of the AV-HS450.
 Refer to "5-1. Setting the video format" in the
Operating Instructions of the AV-HS450.
32 (E)