Fermax AC-MAX CU-2KIT Manual De Instrucciones página 56

Cod. 970073EIPb V04_21
Battery charging settings
300 mA current recommended for 12Vdc/7Ah battery
600 mA current recommended for 12Vdc/17Ah battery
LED signalling
In Normal mode the LED signals lack of external power supply. In case of Memory
reset the LED is used for manual addressing.
Single pulse every 4 sec. : Normal mode
Quick pulsing: Service mode
Slow pulsing (0.5s/0.5s): No communication with central
Very slow pulsing (1s/1s): Configuration memory error
Data transmission to controller
Data receiving from controller
EXP2D/4D terminals
Terminal
BAT+
BAT-
VOUT+
EXP4D
Fig. 18 EXP4D board
Function
Battery positive pole
Battery negative pole
13.8Vdc/0.2A output power positive pole. Connect to AUX + of the
AC-MAX_CU Control Unit.
EN
26/30