Assembly Instructions - Excell VR2522 Manual De Operación

All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS

1. Locate and remove all loose
parts from the carton.
2. Cut four corners of the carton from
top to bottom and lay the panels
fl at.
3. Place handle onto frame, depress
the snap buttons, and slide the
handle assembly onto the frame
until snap buttons snap into place.
Risk of personal
injury. Avoid
placing hands between handle and
frame when assembling to prevent
pinching.
A16637
4. Connect wand to gun. Tighten
securely.
5. Attach high
pressure hose
to gun. Tighten
se cure ly.
6. To Assemble Accessories Panel
a. Align the screw boss on the
accessories panel assembly
with the hole in the handle
and slide accessories panel
assembly onto handle.
Handle
b. Secure accessories panel
assembly to handle with
screws. Do not overtighten.
Screws
7. Roll the unit off the carton and
discard carton.
NOTE: The pump on this unit is
maintenance free and requires no oil,
If there is a problem with the pump
contact an Authorized Service Center.
8- ENG
Screw
Boss