Help And Support - HP Smart Tank 710 Serie Guía De Referencia

Move printer properly
To move the printer to a different location
outside of your home or office after initial
setup, follow these instructions to prevent
ink leaks or printer damage.
1. Turn off the printer and remove the
power cord.
2. Lift the ink access door. Press the
grey button on the printhead cover to
disconnect the ink tubes. Close
the door.
3. Pack the printer in a box (if available).
While moving the printer, keep the
printer horizontal to prevent ink
leakage.
4. After unpacking the printer, push down
on the printhead cover to reconnect
the ink tubes.
5. Connect the power cord and turn on
the printer.
hp.com/support/transportsmarttank
The information contained herein is subject to change without notice.

Help and Support

For printer troubleshooting and videos, visit the
HP support site. Enter your model name to find
the printer.
1
2
3
4
5
hp.com/support