Troubleshooting
The light does not switch on
♦
Correct the light sensitivity using the LUX control
range using the SENS control
♦
An object is blocking the line of sight between the motion detector
and a possible trigger.
♦
The electrical connection is defective. Have the electrical connec-
tion repaired by an authorised electrician or contact the service
hotline (see section "Service").
The light does not switch off
♦
There are objects or people in the detection range of the motion
detector
that are possibly being repeatedly detected by the
motion detector
♦
The motion detector
movement in strong winds. Install the appliance on a stable
mounting surface.
Maintenance
The light source cannot be replaced. The appliance contains a long-
life LED.
The light source in this light cannot be replaced. Once the light source
has reached the end of its lifespan, you need to replace the whole light.
■
34
│
GB │ IE
.
. Remove these if possible.
can sometimes be activated by its own
and/or the
LSLB 10 B2