ADURO H1 Manual De Instrucciones página 45

Quick start guide for use of the Aduro Hybrid 1 App
1. Connect the stove to power outlet
2. Download the Aduro Hybrid 1 app from Google Play (Android) or App Store (Apple)
3. Follow the instruction in the guidance
4. The serial number for operation and password for the App can be found on a label inside the bottom
front door.
5. Software and App is now updated to the newest version
6. Now you are connected and abble to operate using the App
The app screens show:
1. Mode of operation
2. Heat level
3. Smoke temperature
4. CO level. A green bar is OK. If the bar reaches yellow, the hybrid stove will lower its heat level to 1.
If the bar reaches red, the stove with turn off itself.
The CO sensor is located by the pellet inlet to prevent the stove from firing when the chimney draft is not
sufficient.
The CO sensor could be affected by the pellets. Some pellet bags have a high level of CO, that can affect
the sensor up to 24 hours after loading the stove with pellets. If this problem occurs, you can open the door
to the pellet container and add fresh air to the room until the CO level has dropped.
45