Team kalorik TKG FTL 1006 Manual De Instrucciones página 5

Never move the appliance by pulling the cord. Make sure the cord

cannot get caught in any way. Do not wind the cord around the
appliance and do not bend it.
In order to avoid any possible damage due to the normal

temperatures of the appliance in use, please respect the following
installation instructions:
- place the back side as close to the wall as possible
- leave at least 10 cm of free space on each side and above
the appliance.
As a general rule, make sure there is enough ventilation in the

room around this appliance during operation. Stand the appliance
on a stable heat-resistant surface (not a varnished table or a table
cloth).
Make sure the appliance has cooled down before cleaning and

storing it.
Only cook consumable food. Do not place large pieces of food or

metallic utensils in the airfryer in order to avoid all risk of fire or
electrocution. Also never place the following materials in the air
fryer: paper, cardboard or plastic...
It is absolutely necessary to keep this appliance clean at all times as

it comes into contact with food.
Make sure the cord never comes into contact with the hot parts of

the appliance.
The temperature of the accessible surfaces, such as the door of

the airfryer, may be very high when the appliance is in use. Never
touch those surfaces during use nor before the appliance has
totally cooled down, and only handle the knobs.
Make sure the hot parts of the appliance never come into contact

with inflammable materials, such as curtains, cloth, etc. when it is
in use, as a fire might occur. Also make sure not to cover the
appliance and do not put anything on top of it. Make sure nothing
comes into contact with the heating element of the appliance.
CAUTION: the appliance can reach high temperatures when in

use. Preparations might catch fire if they are overheated. Before
pulling the mains plug, switch the temperature selector to "MIN".
If you use the appliance under a cooking hob, make sure to

respect the minimum distance advised by the manufacturer.
5
TKG FTL 1006 - 180822