Before Using For The First Time; Operating Procedure - Bosch DKE 95 Serie Instrucciones De Manejo

Before using for the first time
Important notes:
This hood complies with all
relevant safety regulations.
Repairs should only be carried out by
qualified technicians.
Improperly executed repairs can give
rise to significant hazards for the user.
The appliance is not intended for use
by young children without supervision.
Young children should be supervised to
ensure they do not play with the appliance.
Electrical connections should be made
by a qualified technician.
Dispose of packaging materials
properly (see Installation instructions).
Light bulbs must always be fitted when
the hood is in use.
Never operate the hood without a grea-
se filter.
Overheated fat or oil can easily catch
fire.
If you are cooking with fat or oil, e.g. chips,
etc., never leave food unattended.
Do not flambé food directly under the
hood.
!
Risk of grease filter catching fire due
to flames.
WARNING – TO REDUCE THE RISK OF
INJURY TO PERSONS, IN THE EVENT
OF A RANGE TOP GREASE FIRE,
OBSERVE THE FOLLOWING:
SMOTHER FLAMES with a close-fitting
lid, cookie sheet, or other metal tray, then
turn off the gas burner or the electric ele-
ment. BE CAREFUL TO PREVENT BURNS.
If the flames do not go out immediately,
EVACUATE AND CALL THE FIRE DEPART-
MENT
NEVER PICH UP A FLAMING PAN –
you may be burned.
DO NOT USE WATER, including wet
dishclothes or towels – a violent steam
explosion may result.
4
All manuals and user guides at all-guides.com
Use an extinguisher ONLY if:
1. You know you have a class ABC extin-
guisher, and you already know how to
operate it.
2. The fire is small and contained in the
area where it started.
3. The fire department is being called.
4. You can fight the fire with your back to
an exit

Operating procedure

The most effective method of removing
vapours produced during cooking is to:
❑ Switch the ventilator ON
approximately 5 minutes before you
begin cooking.
❑ Switch the ventilator OFF
a few minutes after you have finished
cooking.
Light Fan settings
Fan OFF
Setting the required fan speed:
❑ Press the corresponding button.
Switching the fan OFF:
❑ Press the 0 button.
Intensive setting:
To obtain maximum power, press the
"Intensive setting" button
This setting is required only briefly.
Lighting:
❑ Press the
button to switch the light on
a
or off.
❑ The light can be switched on at any
time, even though the fan is switched off.
Intensive setting
.