Nikon SUPER COOLSCAN 5000 ED Manual Del Usuario página 68

Problem Solution
Additional perforations along one edge of fi lm. Insert fi lm in direction shown.
Film is more than six frames long. Cut fi lm into lengths of two to six frames (cut fi lm
straight across, being careful not to cut across per-
forations), or use optional SA-30 roll fi lm adapter
(available for 5000 ED only; 48).
Film is only one frame long.
Use optional FH-3 fi lm holder ( 50).
30 mm
6 mm or more
or less
Film is curled.
Perforations are torn or missing.
59