Indesit CTAA 55 NF WD Manual Del Usuario página 26

Instructions for water dispenser
disassembly and cleaning
I. Disassembly
1.Remove all water from the tank at first.Take
out the water tank components "o"pull out
the water tank components in the direction of
45°of oblique upward by hands that are closely
attached on the two sides of the water tank
components, when the lower parts of water tank
components are separated from the water valve
components, the water tank components can be
taken out through horizontal movement (to the
direction of user);
2. Take down the sealing ring of water tank
REFRIGERATOR-FREEZER
II. Cleaning
1. To disassemble the water tank, water tank
cover, sealing ring and water valve;
2. Use cold or warm water to cleaning the
components of water dispenser.
3. Wipe it with dry cloth.
Attentions:
1. If the cleaning solution is used for cleaning
water dispenser, then it is suggested that, before
the water taking and drinking, the water shall be
drained to the amount of 5-6 cups after the water
tank is installed back, so as to avoid the residue
cleaning solution.
9