Introduction - Cameo NANO ROLL 100 Manual De Usuario

to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not exceed the
specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national
accident prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential
health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels
(SPL) that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged
exposure to volumes in excess of 90 dB.

INTRODUCTION

LED GOBO BARREL SCANNER
CLNROLL100
CONTROL FUNCTIONS
2-channel, 8-channel, 10-channel DMX control
Master / slave mode
Standalone operation
FEATURES
Mini Gobo Barrel Scanner with 10W CW CREE LED. Colour wheel with seven colours plus open. Gobo wheel with seven gobos plus open. 180°
pan and continuous barrel rotation. 3 DMX modes. DMX-512 control. Master / slave mode. Standalone programmes. Sound control via built-in
microphone. Safety eyelet bolt and mounting bracket included. Operating voltage 100 – 240 V AC / 50 – 60 Hz. Power consumption 25W
OPERATION
The Cameo NANO ROLL 100 is a DMX-512-controllable mini LED gobo scanner and can be used as a standalone unit, in master / slave
mode and operated by sound control.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.