Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6
Safety Notes
6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms!
• The mixer can not used together with a continuous
flow water heater.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
anti-pollution function
Symbol description
Do not use silicone containing acetic acid!
Adjustment
To adjust the hot water limiter on single lever
mixers, please see page 31.
4
English
max. 1 MPa
0,25 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 32
Maintenance non return valve
(see page 33)
The non return valves must be checked
regularly according to DIN EN 1717
in accordance with national or regional
regulations (at least once a year).
Dimensions (see page 34)
Flow diagram (see page 34)
Rate of flow mixer
Rate of flow handshower
Operation (see page 35)
Due to the design of the Bidette fittings,
a small amount of water will leak at the
outlet of the fitting when the hand shower is
running.
Cleaning
see enclosed brochure.
Spare parts (see page 36)
Special accessories
seal (article number 98996000) order as
an extra
Test certificate (see page 34)
Publicidad
Tabla de contenido
