Maintenance And Service - Garland SHAKER 400 FW Manual De Instrucciones

English
Do not use accessories except those recommended
by our company as otherwise the use of other non
original accessories could cause severe damages to
the end user, to passers-by and to the machine.
Always follow the safety rules stated in this manual.
7.1. FIXING THE MACHINE AND GUIDANCE
Hold the transmission with both hands.
Attention! So as to reduce the risk of loss of control
and possible damages (that could even be fatal) to the
end user and/or those surrounding him, never use this
machine single handedly.
7.2 ADJUST THE LENGTH OF THE POLE
The length of the pole of this machine can be adjusted.
To adjust the length of the pole:
1. Loosen the collar
2. Adapt the length of the pole to the desired
length
3. Tighten the collar

8. MAINTENANCE AND SERVICE

Make periodic inspections of the machine to ensure
that the machine is correct. For a thorough inspection
take the machine to your dealer.
Perform all maintenance of the machine when is set
on a flat and clear surface.
Never try adjustments in the machine if it is running
and / or attache to the user by the harness. Perform
all maintenance of the machine when is set on a flat
and clear surface.
Use only suitable spares to get a proper performance
for this machine. This replacement can be found on
the official distributor of the machine. Using other
sparks may causes risks, damage to the user or
people around the machine.
The removal of security devices, an improper
maintenance, the substitution of elements with non
original elements can cause corporal damages.
28/96