Start Up Instructions; List Of Materials; Mounting The Machine - Garland SHAKER 400 FW Manual De Instrucciones

English

6. START UP INSTRUCTIONS

6.1.LIST OF MATERIALS

This machine includes the following elements that you
will find inside the box:
• Bottom transmission
• Rods (8)
• Extension cable with pliers (20 m.)
• Instruction manual
Ensure that all elements listed above are included with
the machine.
Thanks to the quality control checks at the factory it
is highly unlikely that any elements will be missing. If
you were to find any element missing, do not use the
machine until the defect has been repaired or the
machine is complete.
Using the machine with defective parts or without all
the elements can cause severe personal damages.

6.2. MOUNTING THE MACHINE

1
3
6.3 CABLE FIXING PROTRACTOR
2
6.4. START UP / OFF
6.4.1. CHECK POINTS BEFORE STARTING
4
or wrongly regulated.
Use this machine for the purpose for which it was
designed. Any other use may be dangerous for the
user to the machine and for people, animals and
things you may have around.
26/96
5
Do not use this machine if it becomes damaged