D: Blow Drying And Squeegeeing - Nobles QUICK CLEAN 1500 Manual De Operador

D:
BLOW DRYING AND SQUEEGEEING
NOTE: Use of Formula 720 Rinse will help reduce the
need and time required for blow drying surfaces.
1. Using glass squeegee tool (supplied with machine)
squeegee mirrors if applicable (Figure 20).
FIG. 20
2. Unwrap gray blower hose from machine handle
and connect hose at rear of machine, attach
blower nozzle to hose (Figure 21).
ATTENTION: Do not use black recovery hose
when blow drying. Contaminates will be blown
into the air.
FIG. 21
3. Press vacuum/blower switch towards blower
symbol to activate blower (Figure 22).
FIG. 22
Quick Clean 1500 (03- -00)
Home Find... Go To..
4. Begin blow drying surfaces from top to bottom,
pushing rinse solution to floor. When finished, shut
off blower, wipe off hose and replace it on machine
(Figure 23).
FIG. 23
5. Assemble the double--bend wand, attach
squeegee tool and connect wand to black
recovery hose. Connect black recovery hose at
front of machine (Figure 24).
FIG. 24
6. Press vacuum/blower switch towards vacuum
symbol (Figure 25).
FIG. 25
OPERATION
13