Parts List - Ribimex Ribiland PR4EN1T Manual De Instrucciones

POLE PRUNER
I. PARTS LIST
1. Guide Chain
2. Chain
3. Oil reservoir
4. Oil Cap
5. Gear case
6. Chain cover
7. Upper tube
8. Coupler
9. Handle grip
10. Lower tube
11. Throttle switch
12. Hanger
13. Strap
14. Ignition switch
15. Engine
II. CHARACTÉRISTICS
Chain
Guide bar
Cutting length
Oil tank
Cutterr attachment weight
III. Special Safety Instructions
CAUTION! 1. Always maintain this pole pruner according to the this owner's manual and follow
the recommended scheduled maintenance
2. Never modify or disable any of the pole pruner's safety devices.
3. Always use genuine parts and accessories when repairing or maintaining this
machine.
4. Do not make unauthorized modifications or substitutions to the guide bar or chain.
5. Never allow the engine to run at high RPM without a load. Doing so could damage
the engine.
6. When transporting the pruner in a vehicle, tie it down securely to prevent damage
and fuel spillage.
7. Always stop the engine and allow it to cool before refueling. Avoid overfilling and
wipe off any fuel that may have spilled.
8. Never place flammable material close to the engine muffler and never run the
engine without the spark arrestor screen in place.
9. Always clear your work area of trash or hidden debris to help ensure good footing.
10. Plan an escape route to avoid falling branches.
11. Keep the saw chain sharp and properly adjusted.
12. Keep the pruner as clean as possible. Keep it free of loose vegetation, mud, etc.
3.1 Safety Operation
This machine is designed especially for cutting branches.
All manuals and user guides at all-guides.com
Fig.PP1
10" (250mm)
10" (250mm)
180mm
400ml
1.8kg approx.